Opens in a new tab
Italiano
EA
Cutting & Milling · Flange

EA

EA 15 · EA 200 · Flange Tool Interface · Self-ventilated
3.5–14.7 kW
Power range
3,600 rpm
Max speed
~12 ÷ 30 · ~15 ÷ 100 Nm
Torque
Self-ventilatedFlangeManualIP55
Datasheet library →Request a phone call
What it's built for

Where the EA fits

Squaring and trimming with a disc
A flange-mounted disc cutting unit for end-trimming and sizing, in right or left disc execution, so it drops into a bench built for either hand.
Close-centre and multi-blade cutting
Overall dimensions allow units side by side on 150 mm centres (EA 15), and a multi-blade output (EA 200) takes several cuts in one pass.
Direct drive, robust shaft
A 1:1 gear ratio and a Ø30 mm (EA 15) or Ø40 mm (EA 200) shaft carry the disc, with a guard for Ø350 mm blades available.
Two frame sizes cover 3.5 to 14.7 kW on the same flange mount. Use the motor selector to compare.
Technical data · Catalogue ed. 2024.09

Full specifications

Technical specifications
Power (min / max)
3.5–14.7 kW
Torque
~12 ÷ 30 · ~15 ÷ 100 Nm
Max speed
3,600 rpm
Tool attachment
Flange
Motor type
AC Induction
Cooling
Self-ventilated
Lubrication
Olio · Grease / Oil
Tool change
Manual
IP rating
IP55
Mount type
Flange
Standard features
Right or left disc execution · 1:1 gear ratio · Ø30 mm shaft (EA 15) / Ø40 mm shaft (EA 200)
Variant table
Ref.kWCvNmA @400Vrpm nomF nom Hzrpm maxF max HzPoleskg
EA 15 A3.54.882,820503,600250
EA 15 B5.37.211.72,840503,600253
EA 15 C6.99.4152,830503,600257
EA 15 D3.54.88.81,420503,600453
EA 15 E4.86.610.51,390503,600457
EA 15 F3.2/4.44.4/5.58.1/8.91,410/2,80050/503,6004/253
EA 15 G4.5/5.56.1/7.510.4/121,410/2,83050/503,6004/257
EA 200 B4.4 / 5.36 / 7.210 / 11.81,420 / 1,40050/503,600496
EA 200 C6.3 / 7.58.5 / 10.213.8 / 16.51,425 / 1,40550/503,600499
EA 200 D7.4 / 8.810 / 1216 / 19.41,430 / 1,41050/503,6004129
EA 200 E9.2 / 1112.5 / 1519.7 / 23.81,435 / 1,42050/503,6004134
EA 200 F11 / 13.215 / 1823.3 / 28.21,440 / 1,42550/503,6004140
EA 200 G5.5 / 6.67.5 / 911.5 / 13.82,870 / 2,84050/503,600290
EA 200 H7.4 / 8.810 / 1215.2 / 182,880 / 2,85050/503,600298
EA 200 I9.5 / 11.513 / 15.619.3 / 232,890 / 2,88050/503,6002106
EA 200 L12.9 / 15.517.5 / 2125.1 / 302,905 / 2,88550/503,6002146
EA 200 M14.7 / 17.620 / 2428.4 / 34.32,910 / 2,89050/503,6002150
EA 200 N3.2/4 / 3.9/4.94.4/5.5 / 5.3/6.68.1/8.8 / 9/10.61,410/2,845 / 1,400/2,82050/503,6004/293
EA 200 O3.8/4.8 / 4.6/5.75.2/6.5 / 6.2/7.88.8/10.4 / 10.3/12.61,415/2,850 / 1,405/2,83050/503,6004/296
EA 200 P5.5/9.6 / 6.6/8.37.5/9.4 / 9/11.312/14.3 / 14.6/19.61,420/2,860 / 1,410/2,83050/503,6004/2103
EA 200 Q7.5/9.4 / 8.8/11.410/13 / 12/15.616/19.6 / 19.2/22.41,435/2,900 / 1,420/2,88050/503,6004/2129
EA 200 R9.2/12 / 11/14.312.5/16.3 / 15/19.520/24.5 / 24/281,435/2,900 / 1,420/2,88050/503,6004/2134
EA 200 S10.6/14.4 / 12.8/17.214.5/19.5 / 17.4/23.423.5/29.5 / 28/33.61,440/2,905 / 1,425/2,88550/503,6004/2140

Standard configurations shown. Other pole counts and power ratings available on request. Performance data obtained by numerical simulation.

Standard & Optional

Features & Options

Standard features
  • Right or left disc execution
  • 1:1 gear ratio
  • Ø30 mm shaft (EA 15) / Ø40 mm shaft (EA 200)
  • Dimensions allow side-by-side cutting at 150 mm (EA 15)
Options & Accessories
  • Protection guard for Ø350 mm blades
  • Ø40 mm shaft (EA 15)
  • Multi-blade output (EA 200)
  • Custom design
Upgrade path

Same mount, more capability

EA
3.5–14.7 kW · 3,600 rpm · Flangia

All families in this path share the same mount geometry. Design the machine head for the highest capability you might ever need: start with the base family and upgrade without structural rework. Use the motor selector to compare families.

Full technical datasheet in the VEM library
Dimensional drawings and complete variant data, available on request. Documents are updated periodically.