Opens in a new tab
Italiano
EFLRA
Cutting & Milling · Lateral

EFLRA

EFL RA · ½" Tool Interface · Water cooled
14.7–23 kW
Power range
100 Nm
Torque
Water cooled½"ManualIP55
Datasheet library →Request a phone call
What it's built for

Where the EFLRA fits

Continuous or hot-environment duty, fully liquid cooled
Water cooling gives the ½" lateral platform its highest continuous thermal capacity, holding the 14.7 to 23 kW rating through sustained cuts and in enclosed or hot parts of the machine where self- or servo-ventilation would derate. The benefit is duty, not extra power: it is EFL 20's rating, held longer.
Wet machining of hard-brittle materials
The contactless integrated rotating joint carries coolant to the tool without contact seals to service. Water cooling on the body and coolant through the tool are the setup porcelain, gres and sintered slab need to control heat at the cut and protect the edge.
Top of the ½" cooling ladder, same mount
14.7 to 23 kW on the lateral square-body mount shared with EFL and EFLS, so a head built for ½" lateral gains full water cooling without structural rework, and the same mount carries on to ISO 40, ISO 50 and automatic tool change.
Where a water circuit is not available, EFLS holds sustained duty on servo air and EFL runs lighter cuts self-ventilated, both on the same ½" mount. For ISO interface or automatic change, MACT, MACR and LCR share the lateral mount. Use the motor selector to compare.
Technical data · Catalogue ed. TBD

Full specifications

Technical specifications
Power (min / max)
14.7–23 kW
Torque
100 Nm
Tool attachment
½"
Motor type
AC Induction
Cooling
Water cooled
Lubrication
Maintenance-free bearings
Tool change
Manual
IP rating
IP55
Mount type
Lateral
Standard features
Interchangeable stainless steel ½" adapter · Inverter-duty insulation system · Contactless integrated rotating joint
Standard & Optional

Features & Options

Standard features
  • Interchangeable stainless steel ½" adapter
  • Inverter-duty insulation system
  • Contactless integrated rotating joint
  • Water-cooled body
Options & Accessories
  • High-speed bearings [PROVISIONAL: CSV empty, no EFLRA sheet; carried from EFL, needs confirmation]
Upgrade path

Same mount, more capability

EFL
9.2–23 kW · 5,000 rpm · ½"
EFLRA
14.7–23 kW · ½"
LCR
11–27 kW · 6,000 rpm · ISO 50 · ISO 40

All families in this path share the same mount geometry. Design the machine head for the highest capability you might ever need: start with the base family and upgrade without structural rework. Use the motor selector to compare families.

Full technical datasheet in the VEM library
Dimensional drawings and complete variant data, available on request. Documents are updated periodically.