CNC · Lateral
EP
EP 09 · EP 11 · EP 13 · EP 16 · ½" Tool Interface · Air
1–10.3 kW
Power range
10,000 rpm
Max speed
1.7–25 Nm
Torque
Air½"ManualIP55
What it's built for
Where the EP fits
Light cutting in a tight envelope
The smallest ½" lateral platform, 1 to 10.3 kW across EP 09 to EP 16, for heads where space is tight and the cut does not need EFL power. Right-size the spindle to the duty instead of carrying capacity that never gets used.
Through-tool water on an air-cooled body
The bored shaft passes coolant through the tool as standard, even though the motor itself is air cooled. A compact spindle can wet-cut at the edge where the process needs it, with no cooling circuit to plumb or maintain for the motor.
Already running ½" tooling
Shares the ½" tool interface with the EFL family, so if your head and tooling are already built for ½", the EP drops in for lighter operations without retooling, and steps up to EFL where the cut passes 10 kW.
Need sustained duty or a full cooling circuit on the same compact body? EP S adds servo-ventilation and EP 11-RA adds water cooling, both on the ½" mount. Use the motor selector to compare.
Technical data · Catalogue ed. 2024.09
Full specifications
Technical specifications
Power (min / max)
1–10.3 kWTorque
1.7–25 NmMax speed
10,000 rpmTool attachment
½"Motor type
AC InductionCooling
AirLubrication
Maintenance-free bearingsTool change
ManualIP rating
IP55Mount type
LateralStandard features
Compact design · Bored shaft for through-tool water passage · Inverter-duty insulation systemVariant table
| Ref. | kW | Cv | Nm | A @400V | rpm nom | F nom Hz | rpm max | F max Hz | Poles | kg |
| EP09A | 1 | 1.36 | 1.7 | 2.3 | 5,580 | 100 | 6,000 | 100 | 2 | 12 |
| EP11NA (50Hz) | 2.2 | 3 | 7.5 | 5.2 | 2,790 | 50 | 10,000 | 166 | 2 | 20 |
| EP11NA (100Hz) | 3.3 | 4.5 | 5.5 | 7.5 | 5,780 | 100 | 10,000 | 166 | 2 | 20 |
| EP13 A (50Hz) | 2.4 | 3.2 | 8 | 5.4 | 2,830 | 50 | 10,000 | 166 | 2 | 25 |
| EP13 A (100Hz) | 4 | 5.5 | 6.7 | 8.6 | 5,820 | 100 | 10,000 | 166 | 2 | 25 |
| EP13 B (50Hz) | 3.3 | 4.5 | 11 | 8 | 2,850 | 50 | 10,000 | 166 | 2 | 30 |
| EP13 B (100Hz) | 5.2 | 7 | 8.7 | 10.8 | 5,840 | 100 | 10,000 | 166 | 2 | 30 |
| EP16 A (50Hz) | 5.5 | 7.5 | 18 | 11.5 | 2,870 | 50 | 10,000 | 166 | 2 | 43 |
| EP16 A (100Hz) | 8.1 | 11 | 13.5 | 16 | 5,860 | 100 | 10,000 | 166 | 2 | 43 |
| EP16 C (50Hz) | 7.4 | 10 | 25 | 15.2 | 2,880 | 50 | 10,000 | 166 | 2 | 49 |
| EP16 C (100Hz) | 10.3 | 14 | 17 | 20.3 | 5,870 | 100 | 10,000 | 166 | 2 | 49 |
Standard configurations shown. Other pole counts and power ratings available on request. Performance data obtained by numerical simulation.
Standard & Optional
Features & Options
Standard features
- Compact design
- Bored shaft for through-tool water passage
- Inverter-duty insulation system
Options & Accessories
- High-speed bearings
- Custom shaft (ER DIN6499 or Whistle notch)
- Rotating union (EP 09)
Upgrade path
Same mount, more capability
EP
1–10.3 kW · 10,000 rpm · ½"
All families in this path share the same mount geometry. Design the machine head for the highest capability you might ever need: start with the base family and upgrade without structural rework. Use the motor selector to compare families.
Full technical datasheet in the VEM library
Dimensional drawings and complete variant data, available on request. Documents are updated periodically.