Surface & Edge · Feet
MECRS
MECRS 105 · MECRS 125 · ISO 40 · ISO 50 Tool Interface · Servo-ventilated
10–30 kW
Power range
6,000 rpm
Max speed
100–260 Nm
Torque
Servo-ventilatedISO 40 · ISO 50Pneumatic · HydraulicIP55
What it's built for
Where the MECRS fits
Continuous-line finishing on hard-brittle slab
Servo-ventilation keeps cooling independent of spindle speed, so the motor holds full duty through the long, steady passes that surface and edge work on porcelain and gres demand, where a shaft-driven fan would lose cooling at the low speeds the finish is made at. Built for lines that run continuously, where the cost of a stoppage is highest.
Wet machining of porcelain, gres and sintered surfaces
The rotating water joint feeds coolant through the tool as standard, the wet setup these materials need to control heat at the cut. On thin, hard slab the edge is where the job is won or lost, and clean wet cutting is what protects it against chipping.
One platform, specified to the line
The same feet-mounted spindle spans ISO 40 through ISO 50 and 10 to 30 kW, with tool clamping by pneumatic (105) or hydraulic (125) system. Where the line calls for manual tool change, the MECTS is the same platform without the automatic changer.
Closed-loop feedback is available where the machine runs oriented or interpolated axes (1Vpp or high-resolution TTL encoder). For manual tool change on the same servo-ventilated platform, see MECTS. Use the motor selector to compare across the Surface and Edge range.
Technical data · Catalogue ed. 2026.05
Full specifications
Technical specifications
Power (min / max)
10–30 kWTorque
100–260 NmMax speed
6,000 rpmTool attachment
ISO 40 · ISO 50Motor type
AC InductionCooling
Servo-ventilatedLubrication
Maintenance-free bearingsTool change
Pneumatic · HydraulicIP rating
IP55Mount type
FeetStandard features
Stainless steel bored shaft · Inverter-duty insulation system · Integrated rotating joint for tool coolingVariant table
| Ref. | kW | Cv | Nm | A @400V | rpm nom | F nom Hz | rpm max | F max Hz | Poles | kg |
| MECRS 105 4A | 15 | 20 | 100 | 32 | 1,445 | 50 | 6,000 | 200 | 4 | 140 |
| MECRS 105 4L | 18.5 | 25 | 123 | 39 | 1,450 | 50 | 6,000 | 200 | 4 | 162 |
| MECRS 105 6A | 10 | 13.6 | 100 | 24 | 970 | 50 | 6,000 | 300 | 6 | 141 |
| MECRS 105 6L | 13 | 17.5 | 130 | 29 | 960 | 50 | 6,000 | 300 | 152 | |
| MECRS 125 4A | 25 | 34 | 167 | 52.5 | 1,460 | 50 | 6,000 | 200 | 4 | 223 |
| MECRS 125 4L | 30 | 41 | 200 | 63 | 1,470 | 50 | 6,000 | 200 | 4 | 254 |
| MECRS 125 6A | 18.5 | 25 | 185 | 40 | 970 | 50 | 6,000 | 300 | 6 | 223 |
| MECRS 125 6L | 26 | 35.5 | 260 | 58 | 970 | 50 | 6,000 | 300 | 258 | |
Standard configurations shown. Other pole counts and power ratings available on request. Performance data obtained by numerical simulation.
Standard & Optional
Features & Options
Standard features
- Stainless steel bored shaft
- Inverter-duty insulation system
- Integrated rotating joint for tool cooling
- Servo-ventilation through separately driven fan (patented)
Options & Accessories
- Encoder feedback 1Vpp
- High-resolution TTL incremental encoder (600 ppr)
Upgrade path
Same mount, more capability
MECRS
10–30 kW · 6,000 rpm · ISO 40 · ISO 50
All families in this path share the same mount geometry. Design the machine head for the highest capability you might ever need: start with the base family and upgrade without structural rework. Use the motor selector to compare families.
Full technical datasheet in the VEM library
Dimensional drawings and complete variant data, available on request. Documents are updated periodically.